Barrel Bedding Compound. Use as recoil lug in forend area for other type actions. This kit contains epoxy, mold release, mold release application brush, fumed silica for thickening, mixing sticks and modeling clay to fill pin holes.
$27.90, 4 ounce brown complete bedding system. Slide the cylindrical fixture onto the barrel with the recessed shoulder facing towards the stock. Microballoons • three mixing cups • three mixing/applicator sticks • release agent
Full Bedding Then Adding The Business Cards, Turned It Into A Tack Driver.
Here are some that stand out to me. Acraglas glass bedding actually strengthen’s your stock and prevents water ingress. Slide the cylindrical fixture onto the barrel with the recessed shoulder facing towards the stock.
For Bedding A Rifle It Has Several Flaws In Comparison To The Steel Putty And The Aluminum Putty.
Everything you need to epoxy bed your stock. If the bedding material shrinks over time, that is not a good thing…. May require alteration to rifle for use.
It Is Impervious To Acid Or Oil.
Ideal for wood, synthetic or laminated stocks. The cylindrical fixture is prevented from sliding on the barrel by the gas cylinder lock. A plain 2 pack epoxy will degrade too quickly.
“I Know You’re Not A Devcon Man In Regards To Bedding Compounds But I Respect Your Input In Such Matters And My Question Is This In Regard To Aluminum Actions.
Brownells steel bed is a completely no compromise epoxy and stainless steel bedding and accurizing compound developled specifically for guns. The pads are placed in the barrel channel to support the weight of the barrel. He claims he's shot a.41 group with it.
If You Had A 10/22 Receiver That Was A Little Sloppy With The Barrel Fit Up (Like About 5/16 Movement), Could You Use Some Bedding Compound To Fill The Gap.
Please click the share buttons above or below. $41.85, 8 ounce brown complete bedding system. Intended to improve bedding, needed for 10/22 actions with threaded barrel where the barrel lug has been removed.